|
|
|
National Stock Number:
3040-01-208-9934
Federal Supply Class:
3040
National Item Identification Number:
012089934
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 3606294-1 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.2100 INCHES MINIMUM AND 0.2200 INCHES MAXIMUM | | FIRST END PITCH DIAMETER | 0.0015 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.3000 INCHES MINIMUM AND 0.3300 INCHES MAXIMUM | | FIRST END SPLINE MAJOR DIAMETER | 0.2970 INCHES MINIMUM AND 0.3000 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 0.2318 INCHES MINIMUM AND 0.2398 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 9 | | FIRST END STYLE | SPLINED (INVOLUTE) | | LARGEST STEP DIAMETER | 0.5000 INCHES MINIMUM AND 0.5300 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6260 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 2.805 INCHES NOMINAL | | STEP QUANTITY | 10 |
|
|