3040-01-208-9932 SHAFT,SHOULDERED Index 3040-01-208-9934 SHAFT,SHOULDERED

National Stock Number:
3040-01-208-9933

Federal Supply Class:
3040

National Item Identification Number:
012089933

Description:
SHAFT,SHOULDERED

Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.


Manufacturer Information:
3860365-299193HONEYWELL INTERNATIONAL INC.


Techincal Specification:
END SIMILARITYNOT IDENTICAL
FIRST END DIAMETER1.1802 INCHES MINIMUM AND 1.1807 INCHES MAXIMUM
FIRST END STYLEPLAIN
LARGEST STEP DIAMETER1.4855 INCHES MINIMUM AND 1.4860 INCHES MAXIMUM
OVERALL LENGTH5.740 INCHES MINIMUM AND 5.760 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE
MATERIALSTEEL
SECOND END GROOVE DIAMETER1.3110 INCHES MINIMUM AND 1.3140 INCHES MAXIMUM
SECOND END GROOVE WIDTH0.1410 INCHES MINIMUM AND 0.1510 INCHES MAXIMUM
SECOND END DIAMETER1.4855 INCHES MINIMUM AND 1.4860 INCHES MAXIMUM
SECOND END DISTANCE FROM END TO GROOVE0.1200 INCHES MINIMUM AND 0.1400 INCHES MAXIMUM
SECOND END STYLECIRCULAR GROOVED
SPECIAL FEATURESPARTIAL BORE 0.62 IN. DIA BY 4.96IN. LG SECOND END
STEP QUANTITY5


Click here to Register for Free 30-day Trial