|
|
|
National Stock Number:
3040-01-208-9935
Federal Supply Class:
3040
National Item Identification Number:
012089935
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 3601544-2 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.8400 INCHES MINIMUM AND 1.8800 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.840 INCHES MINIMUM AND 1.880 INCHES MAXIMUM | | OVERALL LENGTH | 4.940 INCHES MINIMUM AND 4.960 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6260 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.7000 INCHES MINIMUM AND 0.7200 INCHES MAXIMUM | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 0.0015 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 0.6900 INCHES MINIMUM AND 0.7100 INCHES MAXIMUM | | SECOND END SPLINE MAJOR DIAMETER | 0.8283 INCHES MINIMUM AND 0.8333 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.7286 INCHES MINIMUM AND 0.7377 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 19 | | SPECIAL FEATURES | FIRST END HAS TRIANGULAR SHAPED MOUNTING PLATE WITH ONE HOLE 0.2509 IN.NOM DIA AT EACH POINT | | STEP QUANTITY | 7 |
|
|