| STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| STATOR INPUT CURRENT RATING | 21.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 50.0 MILLIWATTS NOMINAL |
| TERMINAL TYPE AND QUANTITY | 6 WIRE LEAD |
| BODY STYLE | STANDARD ROUND C |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| BODY SIZE | 10 |
| ZRO RESISTANCE IN OHMS | 800.00 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 2900.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 115.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 470.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 890.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 350.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 560.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 560.00 NOMINAL |
| TRANSFORMATION RATIO | 2.302 ROTOR TO STATOR MINIMUM |
| PHASE SHIFT ANGLE IN DEG | 9.000 INPUT TO OUTPUT NOMINAL |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 0.03 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -12.0 TO 12.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 9.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS NOMINAL |
| SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND |
| 0.8123 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| OVERALL LENGTH | 1.5110 INCHES NOMINAL |
| FLANGE DIAMETER | 0.9360 INCHES MINIMUM AND |
| 0.9370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0630 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.8400 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| PILOT LENGTH | 0.0380 INCHES NOMINAL |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| GEAR OUTSIDE DIAMETER | 1.7073 INCHES MINIMUM AND |
| 1.7083 INCHES MAXIMUM |
| GEAR THICKNESS | 0.1250 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2810 INCHES MAXIMUM |
| ALIGNMENT HOLE DEPTH | 0.0500 INCHES NOMINAL |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6780 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 3 |
| SHAFT TYPE | ROUND, TAPERED, HOLLOWED SINGLE SHAFT |
| SHAFT DIAMETER | 0.0940 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.2300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT HOLE DIAMETER | 0.0600 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TAPERED END MINOR DIAMETER | 0.0775 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TAPER ANGLE IN DEG | 3.0 SINGLE SHAFT |
| SHAFT TAPER LENGTH | 0.1250 INCHES NOMINAL SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | STEEL, CORROSION RESISTING |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 06989 |
| DESIGN CONTROL REFERENCE | 10-CT-304-A-62B |