ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0 TO 8.0 |
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 0.50 INCH-OUNCES MAXIMUM |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.20 INCH-OUNCES MAXIMUM |
AFT OF FIRST FLANGE DIAMETER | 1.9990 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM |
BODY DIAMETER | 1.9900 INCHES MAXIMUM |
BODY MATERIAL | ALUMINUM |
BODY SIZE | 23 |
BODY STYLE | STANDARD ROUND D |
FLANGE DIAMETER | 2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM |
FLANGE THICKNESS | 0.2500 INCHES NOMINAL |
FREQUENCY IN HERTZ | 400.0 NOMINAL |
OVERALL LENGTH | 4.5490 INCHES NOMINAL |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 50.00 OUTPUT |
MAXIMUM TEMP RISE | 25.0 CELSIUS |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 100.00 |
MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.9040 INCHES NOMINAL |
SHOULDER LENGTH | 0.2500 INCHES NOMINAL |
PILOT LENGTH | 0.0430 INCHES NOMINAL |
PILOT DIAMETER | 0.5950 INCHES NOMINAL |
SECOND SHOULDER DIAMETER | 1.9990 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM |
SECOND SHOULDER LENGTH | 0.1700 INCHES NOMINAL |
SHAFT DIAMETER | 0.2402 INCHES MINIMUM AND 0.2405 INCHES MAXIMUM SINGLE SHAFT |
SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
SHAFT THREAD CLASS | 3A SINGLE SHAFT |
SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
SHAFT LENGTH | 0.6930 INCHES MINIMUM AND 0.7190 INCHES MAXIMUM SINGLE SHAFT |
SHAFT THREAD LENGTH | 0.3100 INCHES NOMINAL SINGLE SHAFT |
SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
SHAFT TYPE | ROUND, THREADED SINGLE SHAFT |
SHOULDER DIAMETER | 1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM |
SPECIAL FEATURES | SHAFT SLOTTED PARALLEL 0.0620 IN. NOM W BY 0.6100 IN. NOM DEEP |
SPECIFICATION/STANDARD DATA | 81349-MIL-S-16892 GOVERNMENT SPECIFICATION |
SPLINE TOOTH QUANTITY | 22 SINGLE SHAFT |
STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
STATOR INPUT CURRENT RATING | 297.0 MILLIAMPERES NOMINAL |
STATOR INPUT ELECTRICAL POWER RATING | 4.0 WATTS NOMINAL |
TERMINAL LOCATION | REAR |
TERMINAL TYPE AND QUANTITY | 7 SCREW |
TEST DATA DOCUMENT | 81349-MIL-S-16892 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
TRANSFORMATION RATIO | 1.154 ROTOR TO STATOR NOMINAL |