5990-00-644-0093 SYNCHRO,DIFFERENTIAL TRANSMITTER Index 5990-00-644-0097 SYNCHRO,DIFFERENTIAL TRANSMITTER

National Stock Number:
5990-00-644-0096

Federal Supply Class:
5990

National Item Identification Number:
006440096

Description:
SYNCHRO,DIFFERENTIAL TRANSMITTER

Detail:
A SYNCHRO, THE ROTOR OF WHICH IS MECHANICALLY POSITIONED FOR MODIFYING ELECTRICAL ANGULAR INFORMATION, RECEIVED FROM A TRANSMITTER SYNCHRO AND TRANSMITTING TO RECEIVER SYNCHRO OR CONTROL TRANSFORMER SYNCHRO ELECTRICAL INFORMATION CORRESPONDING TO THE SUM OR DIFFERENCE OF THE ELECTRICAL INPUT ANGLE AND ITS ROTOR POSITION ANGLE. DOES NOT INCLUDE VARIABLE RESISTORS, GONIOMETERS, VARIABLE TRANSFORMERS, OR ITEMS WITH DIALS.


Manufacturer Information:
1109095542NORTHROP GRUMMAN SYSTEMS CORPORATION
23TDX6A81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
82127970U583SAE INTERNATIONAL
821279719200US ARMY ARDEC RDECOM
MIL-S-20708/9481349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SAE-AS20708/940U583SAE INTERNATIONAL
SAE-AS20708?/940U583SAE INTERNATIONAL


Techincal Specification:
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES-8.0 TO 8.0
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS0.50 INCH-OUNCES MAXIMUM
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS0.20 INCH-OUNCES MAXIMUM
AFT OF FIRST FLANGE DIAMETER1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM
BODY DIAMETER1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM
BODY MATERIALALUMINUM
BODY SIZE23
BODY STYLESTANDARD ROUND D
FLANGE DIAMETER2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM
FLANGE THICKNESS0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
FREQUENCY IN HERTZ60.0 NOMINAL
OVERALL LENGTH4.4930 INCHES MINIMUM AND 4.5440 INCHES MAXIMUM
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT75.00 OUTPUT
MAXIMUM TEMP RISE65.0 CELSIUS
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT125.00
MOUNTING SURFACE TO TERMINAL END DISTANCE3.4300 INCHES MINIMUM AND 3.4450 INCHES MAXIMUM
SHOULDER LENGTH0.2520 INCHES NOMINAL
PILOT LENGTH0.0460 INCHES NOMINAL
PILOT DIAMETER0.5900 INCHES MINIMUM AND 0.6000 INCHES MAXIMUM
PLUS J ZRO REACTANCE IN OHMS369.00 NOMINAL
PLUS J ZRS REACTANCE IN OHMS61.00 NOMINAL
PLUS J ZSO REACTANCE IN OHMS214.00 NOMINAL
SECOND SHOULDER DIAMETER1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM
SECOND SHOULDER LENGTH0.1700 INCHES NOMINAL
SHAFT DIAMETER0.2500 INCHES NOMINAL SINGLE SHAFT
SHAFT NOMINAL THREAD SIZE0.250 INCHES SINGLE SHAFT
SHAFT THREAD CLASS2A SINGLE SHAFT
SHAFT THREAD DIRECTIONRIGHT-HAND SINGLE SHAFT
SHAFT THREAD LENGTH0.2660 INCHES NOMINAL SINGLE SHAFT
SHAFT LENGTH0.6930 INCHES NOMINAL SINGLE SHAFT
SHAFT THREAD SERIES DESIGNATORUNF SINGLE SHAFT
SHAFT TYPESPLINE W/THREADS SINGLE SHAFT
SHOULDER DIAMETER1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM
ZRO RESISTANCE IN OHMS138.00 NOMINAL
ZRS RESISTANCE IN OHMS213.00 NOMINAL
ZSO RESISTANCE IN OHMS87.00 NOMINAL
SPLINE TOOTH DIAMETRAL PITCH96 SINGLE SHAFT
SPLINE TOOTH QUANTITY22 SINGLE SHAFT
STATOR INPUT VOLTAGE RATING IN VOLTS90.0 NOMINAL
STATOR INPUT CURRENT RATING380.0 MILLIAMPERES NOMINAL
STATOR INPUT ELECTRICAL POWER RATING11.8 WATTS NOMINAL
TERMINAL LOCATIONREAR
TERMINAL TYPE AND QUANTITY7 SCREW
TEST DATA DOCUMENT81349-MIL-S-17245 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TORQUE GRADIENT PER ANGULAR DEG0.034 INCH-OUNCES NOMINAL
TRANSFORMATION RATIO1.154 ROTOR TO STATOR NOMINAL


Click here to Register for Free 30-day Trial