| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 KNOB |
| APPLICATION DESIGN | TRANSMISSION LINE |
| ATTENUATION VARIATION METHOD | CONTINUOUS |
| BODY STYLE | COAXIAL TYPE |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.500 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 3.500 INCHES NOMINAL |
| COAXIAL CONNECTOR SERIES DESIGNATION | SMA |
| FREQUENCY RANGE | 0.925 GIGAHERTZ MINIMUM AND 1.225 GIGAHERTZ MAXIMUM |
| IMPEDANCE RATING IN OHMS | 50.0 INPUT-OUTPUT |
| INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 6.0 |
| OVERALL ATTENUATION ACCURACY IN DECIBELS | -0.50 TO 0.50 |
| OVERALL ATTENUATION RANGE IN DECIBELS | +0.0 TO 63.0 |
| OVERALL HEIGHT | 2.060 INCHES NOMINAL |
| OVERALL LENGTH | 4.500 INCHES NOMINAL |
| OVERALL WIDTH | 4.500 INCHES NOMINAL |
| MOUNTING FACILITY PATTERN | FOUR POSITION RECTANGULAR |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| POWER RATING | 2.0 WATTS AVERAGE AND 50.0 WATTS PEAK |
| VOLTAGE STANDING WAVE RATIO | 1.80 AND 1.40 |
| TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, COAXIAL, FEMALE |
| TEST DATA DOCUMENT | 45413-134204 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.154 INCHES NOMINAL |