| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 KNOB |
| APPLICATION DESIGN | TRANSMISSION LINE |
| ATTENUATION VARIATION METHOD | CONTINUOUS |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.500 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 3.500 INCHES NOMINAL |
| COAXIAL CONNECTOR SERIES DESIGNATION | SMA |
| FREQUENCY RANGE | 1.000 GIGAHERTZ MINIMUM AND 1.120 GIGAHERTZ MAXIMUM |
| FSC APPLICATION DATA | ANTENNAS,WAVEGUIDES,AND RELATED EQUIP. |
| IMPEDANCE RATING IN OHMS | 50.0 INPUT-OUTPUT |
| OVERALL ATTENUATION ACCURACY IN DECIBELS | -0.50 TO 0.50 |
| OVERALL ATTENUATION RANGE IN DECIBELS | +0.0 TO 100.0 |
| OVERALL HEIGHT | 2.060 INCHES NOMINAL |
| OVERALL LENGTH | 4.500 INCHES NOMINAL |
| OVERALL WIDTH | 4.500 INCHES NOMINAL |
| MOUNTING FACILITY PATTERN | FOUR POSITION RECTANGULAR |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 FLANGE W/MOUNTING HOLE |
| OPERATING TEMP RANGE | +0.0 TO 75.0 CELSIUS |
| POWER RATING | 2.0 WATTS AVERAGE |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL | GOLD |
| VOLTAGE STANDING WAVE RATIO | 1.80 AND 1.40 |
| TERMINAL TYPE AND QUANTITY | 2 CONNECTOR, COAXIAL, FEMALE |
| TEST DATA DOCUMENT | 45413-134204-005 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.154 INCHES NOMINAL |