5905-01-017-0077 RESISTOR,VARIABLE,WIRE WOUND,NON Index 5905-01-017-0080 RESISTOR,VARIABLE,WIRE WOUND,PRE

National Stock Number:
5905-01-017-0079

Federal Supply Class:
5905

National Item Identification Number:
010170079

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
205-902-10184048VERNITRON CORP VRN INTERNATIONAL DIV
3250L-C10-10180294BOURNS INSTRUMENTS INC
381-1846-04013499ROCKWELL COLLINS, INC.
381-1846-04095105ROCKWELL COLLINS, INC.


Techincal Specification:
ELECTRICAL RESISTANCE PER SECTION100.000 OHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER175.0 SINGLE SECTION
BODY HEIGHT0.500 INCHES NOMINAL
BODY LENGTH0.500 INCHES NOMINAL
BODY WIDTH0.190 INCHES NOMINAL
BODY STYLERECTANGULAR W/MOUNTING HOLES
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS0.520 INCHES NOMINAL
OVERALL HEIGHT0.500 INCHES NOMINAL
OVERALL LENGTH0.615 INCHES MAXIMUM
OVERALL WIDTH0.190 INCHES NOMINAL
MOUNTING FACILITY QUANTITY2
MOUNTING HOLE DIAMETER0.078 INCHES NOMINAL
MOUNTING METHODUNTHREADED HOLE
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
SECTION QUANTITY1
SHAFT DIAMETER0.093 INCHES NOMINAL
SHAFT STYLEROUND
SHAFT LENGTH0.105 INCHES MAXIMUM
SPECIAL FEATURESSHAFT HEX SOCKET 0.050 IN. ACROSS FLAT,0.030 IN. DEEP
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-50.0 TO 50.0 SINGLE SECTION
TERMINAL LOCATIONREAR END
TERMINAL TYPE AND QUANTITY3 WIRE LEAD


Click here to Register for Free 30-day Trial