5905-01-017-0072 RESISTOR,FIXED,FILM Index 5905-01-017-0079 RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
5905-01-017-0077

Federal Supply Class:
5905

National Item Identification Number:
010170077

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
15A2113-529266VICKERS INSTRUMENTS INC
3057J-1-20132997BOURNS INC
L0192316236DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS)


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION7920.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION200.0 OHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
BODY HEIGHT0.320 INCHES NOMINAL
BODY LENGTH1.250 INCHES NOMINAL
BODY WIDTH0.190 INCHES NOMINAL
BODY STYLERECTANGULAR W/MOUNTING HOLES/SLOTS
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.300 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS0.100 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.700 INCHES NOMINAL
CRITICALITY CODE JUSTIFICATIONFEAT
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS1.000 INCHES NOMINAL
OVERALL HEIGHT0.470 INCHES NOMINAL
OVERALL LENGTH1.308 INCHES NOMINAL
OVERALL WIDTH0.190 INCHES NOMINAL
MOUNTING FACILITY QUANTITY2
MOUNTING HOLE DIAMETER0.093 INCHES NOMINAL
MOUNTING METHODUNTHREADED HOLE AND TERMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
SECTION QUANTITY1
SHAFT LENGTH0.058 INCHES NOMINAL
SHAFT DIAMETER0.115 INCHES NOMINAL
SHAFT STYLEROUND, SLOTTED
SPECIAL FEATURESFOR NAVY NUCLEAR PROPULSION PLANT PRODUCTS ONLY,ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE ELECTRONICS SUPPLY CENTER PRODUCTION STANDARD NO. L01923
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-50.0 TO 50.0 SINGLE SECTION
TERMINAL LOCATIONLOWER ADJACENT SIDE SINGLE ROW
TERMINAL TYPE AND QUANTITY3 WIRE LOOP


Click here to Register for Free 30-day Trial