5905-00-994-7157 RESISTOR,VARIABLE,NONWIRE WOUND, Index 5905-00-994-7159 RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
5905-00-994-7158

Federal Supply Class:
5905

National Item Identification Number:
009947158

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
146137-100752L3HARRIS TECHNOLOGIES, INC.
202759-0154089DRS C3 & AVIATION COMPANY
224P500-10180294BOURNS INSTRUMENTS INC
992356-149671LOCKHEED MARTIN CORP LOCKHEED MARTIN INFORMATION SYSTEMS AUTOMATED SPARES
ART12-50P10108199EATON AEROSPACE


Techincal Specification:
ELECTRICAL RESISTANCE PER SECTION100.0 OHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
BODY HEIGHT0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
BODY LENGTH1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
BODY WIDTH0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
BODY STYLERECTANGULAR W/MOUNTING HOLES/SLOTS
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM
FEATURES PROVIDEDNONMETALLIC SHAFT
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM
OVERALL HEIGHT0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
OVERALL LENGTH1.300 INCHES MINIMUM AND 1.340 INCHES MAXIMUM
OVERALL WIDTH0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
MAXIMUM STARTING TORQUE5.00 INCH-OUNCES
MOUNTING FACILITY QUANTITY2
MOUNTING HOLE DIAMETER0.088 INCHES MINIMUM
MOUNTING METHODUNTHREADED HOLE
POWER DISSIPATION RATING PER SECTION IN WATTS0.5 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
SECTION QUANTITY1
SHAFT LENGTH0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
SHAFT DIAMETER0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-100.0 TO 100.0 SINGLE SECTION
TERMINAL LOCATIONLOWER ADJACENT SIDE SINGLE ROW
TERMINAL LENGTH0.500 INCHES NOMINAL
TERMINAL TYPE AND QUANTITY3 PIN


Click here to Register for Free 30-day Trial