6250-00-994-7154 STARTER,FLUORESCENT LAMP Index 5905-00-994-7158 RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
5905-00-994-7157

Federal Supply Class:
5905

National Item Identification Number:
009947157

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
3051P1-20480294BOURNS INSTRUMENTS INC


Techincal Specification:
ELECTRICAL RESISTANCE PER SECTION200.0 KILOHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
ACTUATOR TRAVEL CONTROL FEATURESTOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER50.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
BODY HEIGHT0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
BODY LENGTH1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
BODY WIDTH0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
BODY STYLERECTANGULAR W/MOUNTING HOLES/SLOTS
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.700 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.900 INCHES NOMINAL
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM
OVERALL HEIGHT0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
OVERALL LENGTH1.310 INCHES MINIMUM AND 1.330 INCHES MAXIMUM
OVERALL WIDTH0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
MAXIMUM STARTING TORQUE5.00 INCH-OUNCES
MOUNTING FACILITY QUANTITY2
MOUNTING HOLE DIAMETER0.088 INCHES MINIMUM
MOUNTING METHODUNTHREADED HOLE
POWER DISSIPATION RATING PER SECTION IN WATTS0.25 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-20.0 TO 20.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG7920.0 NOMINAL
SECTION QUANTITY1
SHAFT LENGTH0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
SHAFT DIAMETER0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-500.0 TO 300.0 SINGLE SECTION
TERMINAL LENGTH0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM
TERMINAL LOCATIONLOWER ADJACENT SIDE SINGLE ROW
TERMINAL TYPE AND QUANTITY3 PIN


Click here to Register for Free 30-day Trial