|
|
|
National Stock Number:
5365-01-210-4903
Federal Supply Class:
5365
National Item Identification Number:
012104903
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 12338789-2 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 5365012104903 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5365PL0715241 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 5584003 | 34623 | AM GENERAL LLC | | 5593694 | 34623 | AM GENERAL LLC |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.390 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 3.333 INCHES NOMINAL | | HOLE DIAMETER | 0.453 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 1.020 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.590 INCHES NOMINAL | | OVERALL LENGTH | 5.200 INCHES NOMINAL | | OVERALL WIDTH | 0.790 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A366 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A569 ASSN STD 1ST MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1009 OR STEEL COMP 1137 | | SPECIAL FEATURES | 30 DEGREES-ONE END-OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH; OTHER END IS .06X45DEGREES CHAMFER-2 PLS | | STYLE DESIGNATOR | NON-CIRCULAR W/BEVELED CORNERS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 1 FED SPEC 1ST TREATMENT RESPONSE OR ASTM B633,TY 2,CL FE/ZN25 ASSN STD 2ND TREATMENT RESPONSE | | SURFACE TREATMENT | CADMIUM OR ZINC AND CHROMATE |
|
|