5340-01-210-4901 COUPLING,CLAMP,GROOVED Index 5365-01-210-4903 SPACER,PLATE

National Stock Number:
5365-01-210-4902

Federal Supply Class:
5365

National Item Identification Number:
012104902

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.


Manufacturer Information:
12338789-119207U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
5365012104902A00AME.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
5365012104902SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
558400234623AM GENERAL LLC
559369334623AM GENERAL LLC


Techincal Specification:
BOLT HOLE QUANTITY2
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE0.390 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.333 INCHES NOMINAL
HOLE DIAMETER0.453 INCHES NOMINAL
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH1.020 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.590 INCHES NOMINAL
OVERALL LENGTH5.200 INCHES NOMINAL
OVERALL WIDTH0.790 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A366 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A569 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A109 ASSN STD 2ND MATERIAL RESPONSE
MATERIALSTEEL COMP 1009 OR STEEL COMP 1137
SPECIAL FEATURES30 DEGREES-ONE END-OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH; OTHER END IS .06X45 DEGREES CHAMFER-2 PL
STYLE DESIGNATORNON-CIRCULAR W/BEVELED CORNERS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 1 FED SPEC 1ST TREATMENT RESPONSE OR ASTM B633,TY 2,CL FE/ZN25 ASSN STD 2ND TREATMENT RESPONSE
SURFACE TREATMENTCADMIUM OR ZINC AND CHROMATE


Click here to Register for Free 30-day Trial