| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.499 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.121 INCHES NOMINAL |
| FIRST END LOCATION | SHOULDER END |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.120 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST HOLE DIAMETER | 0.560 INCHES NOMINAL |
| FIRST STEP DIAMETER | 1.990 INCHES MINIMUM AND 2.000 INCHES MAXIMUM |
| FIRST STEP LENGTH | 1.780 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | A6-829-000823 CAGEC 12361 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 1040 OVERALL OR STEEL COMP 1045 OVERALL |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND END COUNTERBORE DEPTH | 0.500 INCHES NOMINAL |
| SECOND END COUNTERBORE DIAMETER | 0.810 INCHES NOMINAL |
| SECOND END STYLE | THREADED AND COUNTERBORED |
| SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND HOLE DIAMETER | 0.250 INCHES NOMINAL |
| SECOND STEP DIAMETER | 1.4995 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM |
| SECOND STEP LENGTH | 2.880 INCHES NOMINAL |
| SPECIAL FEATURES | SLOT AND UNDERCUT ON SHANK END |
| STYLE DESIGNATOR | SHOULDER |
| THIRD STEP DIAMETER | 1.3678 INCHES MINIMUM AND 1.3760 INCHES MAXIMUM |
| THIRD STEP LENGTH | 1.030 INCHES NOMINAL |