|
|
|
National Stock Number:
5315-01-352-3511
Federal Supply Class:
5315
National Item Identification Number:
013523511
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 2HG90 | 45152 | OSHKOSH CORP | | 6-689-001058 | 12361 | GROVE U.S. LLC |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.780 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.310 INCHES NOMINAL | | FIRST END LOCATION | SHOULDER END | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.120 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.531 INCHES NOMINAL | | FIRST STEP DIAMETER | 1.990 INCHES MINIMUM AND 2.000 INCHES MAXIMUM | | FIRST STEP LENGTH | 1.280 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | A6-829-000823 CAGEC 12361 MFR REF ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 1040 OVERALL OR STEEL COMP 1045 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND END STYLE | SQUARE INTERNALLY THREADED | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND HOLE DIAMETER | 0.250 INCHES NOMINAL | | SECOND STEP DIAMETER | 1.4995 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM | | SECOND STEP LENGTH | 1.940 INCHES NOMINAL | | STYLE DESIGNATOR | SHOULDER | | THIRD STEP DIAMETER | 1.3678 INCHES MINIMUM AND 1.3760 INCHES MAXIMUM | | THIRD STEP LENGTH | 0.930 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 18 |
|
|