|
|
|
National Stock Number:
5315-01-351-2992
Federal Supply Class:
5315
National Item Identification Number:
013512992
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 211068920 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 801-6408784 PC 111 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 801-6408784-111 | 53711 | NAVAL SEA SYSTEMS COMMAND | | DF330644 FIND 111 | 43689 | HUNTINGTON INGALLS INC |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.360 INCHES NOMINAL | | FIRST END LOCATION | SHANK END | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | OVERALL LENGTH | 2.970 INCHES MINIMUM AND 2.990 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY K-500 OVERALL | | NOMINAL THREAD SIZE | 0.500 INCHES | | SECOND END STYLE | SQUARE | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SHANK DIAMETER | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | SHANK LENGTH | 2.260 INCHES NOMINAL | | SHOULDER DIAMETER | 0.500 INCHES NOMINAL | | STYLE DESIGNATOR | SHOULDER | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.710 INCHES MINIMUM AND 0.730 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNC |
|
|