|
|
|
National Stock Number:
5315-01-351-2991
Federal Supply Class:
5315
National Item Identification Number:
013512991
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 879427-01 | 18894 | AIR ARMAMENT CENTER/ EN |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.250 INCHES NOMINAL | | FIRST END LOCATION | LONG END | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.187 INCHES MINIMUM AND 0.192 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | OVERALL LENGTH | 4.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND B FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 302 OR STEEL COMP 304 OVERALL | | SPECIAL FEATURES | 0.096 IN. DIA HOLE PERPENDICULAR ON LONG SHANK END PLUS 0.125 IN. WIDE SLOT | | SECOND END STYLE | ROUND | | SECOND END OUTER RADIUS | 0.190 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND SHANK DIAMETER | 0.375 INCHES NOMINAL | | SECOND SHANK LENGTH | 2.688 INCHES NOMINAL | | SHANK DIAMETER | 0.339 INCHES MINIMUM AND 0.369 INCHES MAXIMUM | | SHANK LENGTH | 0.937 INCHES NOMINAL | | SHOULDER DIAMETER | 0.772 INCHES MINIMUM AND 0.778 INCHES MAXIMUM | | STYLE DESIGNATOR | SHOULDER |
|
|