|
|
|
National Stock Number:
5315-00-135-4480
Federal Supply Class:
5315
National Item Identification Number:
001354480
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 10903058 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.625 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 3.375 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.031 INCHES MINIMUM AND 0.046 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.156 INCHES MINIMUM AND 0.160 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL OVERALL | | SPECIAL FEATURES | 22DEG ANGLE BETWEEN CENTERLINES OF HOLES | | PIN OVERALL DIAMETER | 0.4940 INCHES MINIMUM AND 0.4970 INCHES MAXIMUM | | PIN OVERALL LENGTH | 6.187 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.156 INCHES MINIMUM AND 0.160 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-16232,TYZ,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE ZINC OVERALL |
|
|