|
|
|
National Stock Number:
5315-00-135-4479
Federal Supply Class:
5315
National Item Identification Number:
001354479
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 10920712 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.437 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 5.313 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.256 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 0.7470 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM | | PIN OVERALL LENGTH | 6.312 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.256 INCHES MAXIMUM | | SPECIAL FEATURES | MIDDLE HOLE 1.687 IN FROM END OF SHAFT.11DEG ANGLE BETWEEN CENTERLINES OF END HOLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232,TY Z,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE OVERALL |
|
|