|
|
|
National Stock Number:
5310-00-641-9204
Federal Supply Class:
5310
National Item Identification Number:
006419204
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| HPC176102 | 70236 | TACTAIR FLUID CONTROLS INC | | HPC176102 | 84685 | TELEDYNE HYDRA-POWER DIV OF TELEDYNE INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.408 INCHES MINIMUM AND 0.418 INCHES MAXIMUM | | OVERALL DIAMETER | 0.612 INCHES MINIMUM AND 0.622 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 440A OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM |
|
|