|
|
|
National Stock Number:
5310-00-641-9202
Federal Supply Class:
5310
National Item Identification Number:
006419202
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 03A250D20E60 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 4M36-01060 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 726038-3 | 98897 | LOCKHEED MARTIN CORP | | 75A325416-2003 | K0289 | BRITISH AEROSPACE MILITARY AIRCRAFT & AEROSTRUCTURES | | 75A325416-2003 | K1987 | BAE SYSTEMS PLC | | 75A325416-2003 | U9143 | BAE SYSTEMS (OPERATIONS) LIMITED |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.193 INCHES MINIMUM AND 0.199 INCHES MAXIMUM | | OVERALL DIAMETER | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 301 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.063 INCHES NOMINAL |
|