| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | NIPPLE COPPER ALLOY 360 ALL ENDS |
| END FITTING COMPONENT AND MATERIAL | NUT COPPER ALLOY 360 1ST END |
| BURST TEST PRESSURE | 800.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| INSIDE DIAMETER | 0.343 INCHES MINIMUM AND 0.407 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED RUBBER, COMPOSITION AND 2ND LAYER BRAIDED COTTON CORD OR 2ND LAYER BRAIDED RAYON CORD AND 4TH LAYER MOLDED RUBBER, COMPOSITION |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ETHYLENE GLYCOL RESISTANT AND WATER RESISTANT |
| OUTSIDE DIAMETER | 0.718 INCHES MINIMUM AND 0.782 INCHES MAXIMUM |
| MAXIMUM OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 22.620 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | ETHYLENE GLYCOL AND WATER SINGLE RESPONSE |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER,SYNTHETIC,ETHYLENE PROPYLENE DIENNE-POLY-METHYLENE,B F GOODRICH GRADE 149FS75; THREAD SERIES DESIGNATOR: JIC |
| TEMP RATING | 35.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD QUANTITY PER INCH | 18 1ST END |