| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | NIPPLE COPPER ALLOY 360 ALL ENDS |
| END FITTING COMPONENT AND MATERIAL | NUT COPPER ALLOY 360 1ST END |
| BURST TEST PRESSURE | 800.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| INSIDE DIAMETER | 0.343 INCHES MINIMUM AND 0.407 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED RUBBER, COMPOSITION AND 2ND LAYER BRAIDED COTTON CORD OR 2ND LAYER BRAIDED RAYON CORD AND 3RD LAYER BRAIDED COTTON CORD OR 2ND LAYER BRAIDED RAYON CORD AND 4TH LAYER MOLDED RUBBER, COMPOSITION |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ETHYLENE GLYCOL RESISTANT AND WATER RESISTANT |
| OUTSIDE DIAMETER | 0.718 INCHES MINIMUM AND 0.782 INCHES MAXIMUM |
| MAXIMUM OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 11.500 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | ETHYLENE GLYCOL AND WATER SINGLE RESPONSE |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER,SYNTHETIC,ETHYLENE PROPYLENE DIENNE-POLY-METHYLENE,B F GOODRICH GRADE 149FS75; THREAD SERIES DESIGNATOR: JIC |
| TEMP RATING | 35.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD QUANTITY PER INCH | 18 1ST END |