3110-01-210-9464 BEARING,BALL,DUPLEX Index 3120-01-210-9466 BUSHING,SLEEVE

National Stock Number:
3120-01-210-9465

Federal Supply Class:
3120

National Item Identification Number:
012109465

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
18KP86045152OSHKOSH CORP
18KP86075Q65OSHKOSH DEFENSE LLC
4W569811083CATERPILLAR INC
IPD4W569855883INDUSTRIAL PARTS DEPOT INC


Techincal Specification:
ANTIROTATION/LUBRICATION TYPE AND QUANTITY2 HOLE
BODY INSIDE DIAMETER121.512 MILLIMETERS NOMINAL
BODY OUTSIDE DIAMETER130.79 MILLIMETERS MINIMUM AND 131.79 MILLIMETERS MAXIMUM
CORNER SHAPECHAMFERED ALL CORNERS
HOLE DIAMETER9.75 MILLIMETERS MINIMUM FIRST AND 9.25 MILLIMETERS MAXIMUM FIRST
LUBRICANT ACCOMMODATION STYLEGROOVED CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATION1E647,FSCM 11083 MFR REF SINGLE MATERIAL RESPONSE INNER LAYER
MATERIAL DOCUMENT AND CLASSIFICATION1E647,FSCM 11083 MFR REF SINGLE MATERIAL RESPONSE INTERMEDIATE LAYER
MATERIAL DOCUMENT AND CLASSIFICATION1E647,FSCM 11083 MFR REF SINGLE MATERIAL RESPONSE OUTER LAYER
MATERIALALUMINUM INNER LAYER
MATERIALCOPPER ALLOY INTERMEDIATE LAYER
MATERIALSTEEL OUTER LAYER
PROPRIETARY CHARACTERISTICSPACS
OVERALL LENGTH41.52 MILLIMETERS MINIMUM AND 41.78 MILLIMETERS MAXIMUM
SPECIAL FEATURESUPPER HALF LOCKING LUG 1.5 PORM 0.4 MM HIGH,5.6 PORM 0.3 MM LONG,6.10 PORM 0.08 MM WIDE,8.23 PORM 0.1 MM LUG END TO END BEARING; LOWER HALF LOCKING LUG 1.5 PORM 0.4 MM HIGH,5.6 PORM 0.3 MM LONG,6.10 PORM 0.08 MM WIDE,8.23 PORM 0.10 MM LUG END TO END BEARING
STYLE DESIGNATORSEGMENTED, PLAIN, NO OUTSIDE FLANGES
SURFACE GROOVE LOCATION AND QUANTITY1 INTERNAL


Click here to Register for Free 30-day Trial