| BEARING PRELOAD RATING | 1.75 POUNDS MINIMUM AND 2.25 POUNDS MAXIMUM |
| BORE DIAMETER | 0.234200 INCHES MINIMUM AND 0.234250 INCHES MAXIMUM |
| CONTACT ANGLE | 5.0 DEGREES MINIMUM AND 25.0 DEGREES MAXIMUM |
| INTERNAL CLEARANCE | 0.0006 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | ANGULAR |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | 639AS3195 MFR REF SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OVERALL OUTSIDE DIAMETER | 0.406101 INCHES MINIMUM AND 0.406150 INCHES MAXIMUM |
| OVERALL WIDTH | 0.2030 INCHES MINIMUM AND 0.2350 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | PLASTIC PHENOLIC RETAINER |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C OUTER RING |
| MATERIAL | STEEL COMP 440C INNER RING |
| RETAINER FABRICATION METHOD | MACHINED |
| SPECIAL FEATURES | CONSISTS OF ONE BEARING WITHOUT A FLANGE AND ONE BEARING WITH A FLANGE,FLANGE 0.4360 IN. MIN AND 0.4370 IN. MAX DIA,0.0220 IN. MIN AND 0.0230 IN. MAX W |
| SURFACE FINISH | GROUND |
| SURFACE TREATMENT | PASSIVATE BALL |
| SURFACE TREATMENT | PASSIVATE INNER RING |
| SURFACE TREATMENT | PASSIVATE OUTER RING |