|
|
|
National Stock Number:
3040-01-348-4404
Federal Supply Class:
3040
National Item Identification Number:
013484404
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 3C3719 | 07482 | GENERAL ELECTRIC COMPANY | | 3C3719P38 | 07482 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.8080 INCHES MINIMUM AND 0.8085 INCHES MAXIMUM | | FIRST END WIDTH ACROSS FLATS | 0.6865 INCHES NOMINAL | | FIRST END STEP LENGTH | 0.2100 INCHES NOMINAL | | FIRST END STYLE | HEXAGONAL | | LARGEST STEP DIAMETER | 1.231 INCHES MINIMUM AND 1.236 INCHES MAXIMUM | | OVERALL LENGTH | 1.085 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | SPECIAL FEATURES | 1ST END INT THD,0.190-24UNC 2B BY 0.440 IN.DP | | SECOND END DIAMETER | 1.2310 INCHES MINIMUM AND 1.2360 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 1.1360 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 24 | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 1.2000 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 0.6620 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 1.2310 INCHES MINIMUM AND 1.2360 INCHES MAXIMUM | | STEP QUANTITY | 3 |
|
|