|
|
|
National Stock Number:
3040-01-348-4403
Federal Supply Class:
3040
National Item Identification Number:
013484403
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 3C3719 | 07482 | GENERAL ELECTRIC COMPANY | | 3C3719P30 | 07482 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.6225 INCHES MINIMUM AND 0.6230 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.000 INCHES NOMINAL | | OVERALL LENGTH | 2.460 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END GROOVE DIAMETER | 0.9370 INCHES MINIMUM AND 0.9430 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0460 INCHES MINIMUM AND 0.0490 INCHES MAXIMUM | | SECOND END DIAMETER | 0.9980 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 0.1000 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | STEP QUANTITY | 3 |
|
|