|
|
|
National Stock Number:
3040-01-201-5446
Federal Supply Class:
3040
National Item Identification Number:
012015446
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 007204-1 | 59027 | MEGGITT DEFENSE SYSTEMS, INC. DBA MEGGITT WESTERN DESIGN | | 007204-1 | 62228 | MEGGITT DEFENSE SYSTEMS, INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.100 INCHES NOMINAL | | FIRST END DIAMETER | 1.0000 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.6600 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.1200 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | LARGEST STEP DIAMETER | 1.000 INCHES NOMINAL | | OVERALL LENGTH | 9.687 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 COND H 1150 M ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 17-4PH | | SECOND END DIAMETER | 0.7867 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.7867 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.6360 INCHES NOMINAL | | SECOND END INTERNAL THREAD LENGTH | 0.625 INCHES NOMINAL | | SECOND END PITCH DIAMETER | 0.7500 INCHES NOMINAL | | STEP QUANTITY | 3 | | SPECIAL FEATURES | SPLINE HAS 15 TEETH; SPLINE LENGTH IS 9.647 INCH; SPLINE HAS PRESSURE ANGLE OF 30 DEGREES; PASSIVATE SHAFT PER QQ-P-35 TYPE 1,2 OR 3 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|