|
|
|
National Stock Number:
3040-01-201-5445
Federal Supply Class:
3040
National Item Identification Number:
012015445
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 007235-1 | 59027 | MEGGITT DEFENSE SYSTEMS, INC. DBA MEGGITT WESTERN DESIGN | | 007235-1 | 62228 | MEGGITT DEFENSE SYSTEMS, INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.5152 INCHES NOMINAL | | FIRST END PITCH DIAMETER | 0.5833 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 7.065 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.6237 INCHES MINIMUM AND 0.6242 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 0.5150 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 14 | | FIRST END STYLE | SPLINED (INVOLUTE) | | OVERALL LENGTH | 9.253 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 COND H-1150 17-4PH ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | SPECIAL FEATURES | 1 SPLINE TOOTH IS OMITTED; SPLINED END HAS THREADED HOLE 90 DEG BY 0.260 IN DIA C'SK; THREADS PER 0.250-28UNF-3B 0.625 IN THREAD DEPTH; 1 END HAS HEX NUT WITH DISTANCES BETWEEN OPPOSITE FLATS OF BETWEEN 0.740 IN AND 0.752 INCH | | SURFACE FINISH | 125.0 MICROINCHES |
|
|