9540-01-260-7838, BEAM,STRUCTURAL

National Stock Number:
9540-01-260-7838

Federal Supply Class:
9540

National Item Identification Number:
012607838

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.

Manufacturer Information:

10136-3001	29321	TRANSTAR METALS CORP
9540PL0842544	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
9540PL1391731	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
9540PL1727662	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
9540PL1882329	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
AMS-QQ-A-200/8	0U583	SAE INTERNATIONAL
AMS-QQ-A-200/8	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
AND10136-3001	99237	AIRFORCE-NAVY AERONAUTICAL DESIGN STANDARD
K40B141T6511	81755	LOCKHEED MARTIN CORPORATION
QQ-A-200/8	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
SAE-AMS-QQ-A-200/8	0U583	SAE INTERNATIONAL

Techincal Specification:

BASIC SHAPE STYLE	T SHAPE
FABRICATION METHOD	EXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FIRST TIP STYLE	SQUARE END
HEAT TREATMENT	T-6511 SOLUTION HEAT TREATED
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.500 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS	0.125 INCHES NOMINAL
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
LEG THICKNESS	0.125 INCHES NOMINAL
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL HEIGHT	1.500 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-QQ-A-200/8 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 6061
NONDEFINITIVE SPEC/STD DATA	T6511 TEMPER
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.500 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS	0.125 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIP	IDENTICAL
SPECIFICATION/STANDARD DATA	81755-K40 MANUFACTURERS STANDARD
THIRD TIP RADIUS	0.062 INCHES NOMINAL
THIRD TIP STYLE	FULL RADIUS
THIRD TIP RELATIONSHIP TO PRECEDING TIPS	NOT IDENTICAL
TOP FLANGE WIDTH	3.000 INCHES NOMINAL

Click here to Register for Free 30-day Trial