9540-01-011-7146 ANGLE,STRUCTURAL Index 9905-01-011-7149 PLATE,IDENTIFICATION

National Stock Number:
9540-01-011-7148

Federal Supply Class:
9540

National Item Identification Number:
010117148

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.


Manufacturer Information:
1242627610INTERNATIONAL LIGHT METALS CORP SUB OF MARTIN MARIETTA CORP
AMS-QQ-A-200/30U583SAE INTERNATIONAL
AMS-QQ-A-200/381343SOCIETY OF AUTOMOTIVE ENGINEERS INC
LS204598897LOCKHEED MARTIN CORP
PA1126406012TRANSTAR METALS CORP
QQ-A-200/381348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC


Techincal Specification:
BASIC SHAPE STYLET SHAPE
FABRICATION METHODEXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.188 INCHES NOMINAL
FIRST TIP STYLESQUARE END
HEAT TREATMENTT-3511 SOLUTION HEAT TREATED
LEFT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES0.844 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.070 INCHES NOMINAL
LEG THICKNESS0.188 INCHES NOMINAL
LENGTH10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL HEIGHT1.500 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/3 FED SPEC 1ST MATERIAL RESPONSE
MATERIALALUMINUM ALLOY 2024
NONDEFINITIVE SPEC/STD DATAT3511 TEMPER
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.156 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.188 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIPIDENTICAL
WEIGHT PER UNIT MEASURE0.655 POUNDS PER LINEAR FOOT
THIRD TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/FIRST TIP
TOP FLANGE WIDTH2.000 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us