9540-01-011-3242, BEAM,STRUCTURAL

National Stock Number:
9540-01-011-3242

Federal Supply Class:
9540

National Item Identification Number:
010113242

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.

Manufacturer Information:

25077	27610	INTERNATIONAL LIGHT METALS CORP SUB OF MARTIN MARIETTA CORP
60-21869	29321	TRANSTAR METALS CORP
AMS-QQ-A-200/3	0U583	SAE INTERNATIONAL
AMS-QQ-A-200/3	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
LS4774	98897	LOCKHEED MARTIN CORP
QQ-A-200/3	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC

Techincal Specification:

BASIC SHAPE STYLE	T SHAPE
FABRICATION METHOD	EXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.060 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG	0.060 INCHES NOMINAL
FIRST TIP RADIUS	0.025 INCHES NOMINAL
FIRST TIP STYLE	FULL RADIUS
HEAT TREATMENT	T-3511 SOLUTION HEAT TREATED
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	0.580 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS	0.050 INCHES NOMINAL
LEG THICKNESS	0.600 INCHES NOMINAL
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL HEIGHT	0.350 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 2024
NONDEFINITIVE SPEC/STD DATA	T3511 TEMPER
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.310 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS	0.050 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIP	IDENTICAL
WEIGHT PER UNIT MEASURE	0.330 POUNDS PER LINEAR FOOT
THIRD TIP RELATIONSHIP TO PRECEDING TIPS	NOT IDENTICAL
THIRD TIP STYLE	SQUARE END
TOP FLANGE WIDTH	1.890 INCHES NOMINAL

Click here to Register for Free 30-day Trial