9540-00-993-2671, BEAM,STRUCTURAL

National Stock Number:
9540-00-993-2671

Federal Supply Class:
9540

National Item Identification Number:
009932671

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.

Manufacturer Information:

AMS-QQ-A-200/3	0U583	SAE INTERNATIONAL
AMS-QQ-A-200/3	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
AMS101402002	0U583	SAE INTERNATIONAL
AMS101402002	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
QQ-A-200/3	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
QQA267	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC

Techincal Specification:

BASIC SHAPE STYLE	H SHAPE
FABRICATION METHOD	EXTRUDED
FILLET RADIUS WHERE BOTTOM LEFT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FIRST TIP RADIUS	0.125 INCHES NOMINAL
FIRST TIP STYLE	RIGHT QUARTER RADIUS
FOURTH TIP RELATIONSHIP TO PRECEDING TIPS	IDENTICAL W/SECOND TIP
HEAT TREATMENT	T-3511 SOLUTION HEAT TREATED
LEFT SIDE FLANGE HEIGHT	2.000 INCHES NOMINAL
LEFT SIDE FLANGE THICKNESS	0.125 INCHES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.000 INCHES NOMINAL
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
LEFT BOTTOM INSIDE ANGLE	90.0 DEGREES NOMINAL
LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.000 INCHES NOMINAL
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL WIDTH	2.000 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 2024
RIGHT BOTTOM INSIDE ANGLE	90.0 DEGREES NOMINAL
RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.000 INCHES NOMINAL
RIGHT SIDE FLANGE HEIGHT	2.000 INCHES NOMINAL
RIGHT SIDE FLANGE THICKNESS	0.125 INCHES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.000 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
SECOND TIP RADIUS	0.125 INCHES NOMINAL
SECOND TIP STYLE	LEFT QUARTER RADIUS
SECOND TIP RELATIONSHIP TO FIRST TIP	NOT IDENTICAL
WEIGHT PER UNIT MEASURE	0.860 POUNDS PER LINEAR FOOT
WEB FLANGE THICKNESS	0.125 INCHES NOMINAL
THIRD TIP RELATIONSHIP TO PRECEDING TIPS	IDENTICAL W/FIRST TIP

Click here to Register for Free 30-day Trial