9540-00-805-8019, BEAM,STRUCTURAL

National Stock Number:
9540-00-805-8019

Federal Supply Class:
9540

National Item Identification Number:
008058019

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.

Manufacturer Information:

9125	77783	ALCOA/REYNOLDS METALS COMPANY
AMS-QQ-A-200/11	0U583	SAE INTERNATIONAL
AMS-QQ-A-200/11	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
LS4344	98897	LOCKHEED MARTIN CORP
QQ-A-200/11	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC

Techincal Specification:

BASIC SHAPE STYLE	T SHAPE
FABRICATION METHOD	EXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FIRST TIP INNER RADIUS	0.031 INCHES NOMINAL
FIRST TIP OUTER RADIUS	0.031 INCHES NOMINAL
FIRST TIP STYLE	SQUARE W/ INNER AND OUTER CORNER RADII
HEAT TREATMENT	T-6 SOLUTION HEAT TREATED AND ARTIFICALLY AGED
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.630 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS	0.125 INCHES NOMINAL
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
LEG THICKNESS	0.078 INCHES NOMINAL
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL HEIGHT	1.000 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 7075
NONDEFINITIVE SPEC/STD DATA	T6 TEMPER
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.630 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS	0.125 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIP	IDENTICAL
SPECIFICATION/STANDARD DATA	81348-QQ-A-200/11 GOVERNMENT SPECIFICATION
WEIGHT PER UNIT MEASURE	0.600 POUNDS PER LINEAR FOOT
THIRD TIP DIAMETER	0.188 INCHES NOMINAL
THIRD TIP RADIUS	0.062 INCHES NOMINAL
THIRD TIP STYLE	LEFT BULBOUS
THIRD TIP RELATIONSHIP TO PRECEDING TIPS	NOT IDENTICAL
TOP FLANGE WIDTH	3.260 INCHES NOMINAL

Click here to Register for Free 30-day Trial