9540-00-720-4319 ANGLE,STRUCTURAL Index 9510-00-720-4326 BAR,METAL

National Stock Number:
9540-00-720-4321

Federal Supply Class:
9540

National Item Identification Number:
007204321

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.


Manufacturer Information:
1416793-720088277THE BOEING COMPANY
60-216129321TRANSTAR METALS CORP
6082201634ALUMINUM CO OF AMERICA
AMS-QQ-A-200/110U583SAE INTERNATIONAL
AMS-QQ-A-200/1181343SOCIETY OF AUTOMOTIVE ENGINEERS INC
QQ-A-200/1181348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC


Techincal Specification:
BASIC SHAPE STYLET SHAPE
FABRICATION METHODEXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FIRST TIP INNER RADIUS0.031 INCHES NOMINAL
FIRST TIP OUTER RADIUS0.031 INCHES NOMINAL
FIRST TIP STYLESQUARE W/ INNER AND OUTER CORNER RADII
HEAT TREATMENTT-6 SOLUTION HEAT TREATED
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.125 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.125 INCHES NOMINAL
LEFT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
LEG THICKNESS0.125 INCHES NOMINAL
LENGTH12.000 FEET NOMINAL
OVERALL HEIGHT3.000 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/11 FED SPEC 1ST MATERIAL RESPONSE
MATERIALALUMINUM ALLOY 7075
NONDEFINITIVE SPEC/STD DATAT6 TEMPER
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.125 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.125 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIPIDENTICAL
WEIGHT PER UNIT MEASURE0.775 POUNDS PER LINEAR FOOT
THIRD TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/FIRST TIP
TOP FLANGE WIDTH2.250 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us