9540-00-167-4347 BEAM,STRUCTURAL Index 9540-00-167-4363 BEAM,STRUCTURAL

National Stock Number:
9540-00-167-4350

Federal Supply Class:
9540

National Item Identification Number:
001674350

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.


Manufacturer Information:
3154301634ALUMINUM CO OF AMERICA
AMS-QQ-A-200/30U583SAE INTERNATIONAL
AMS-QQ-A-200/381343SOCIETY OF AUTOMOTIVE ENGINEERS INC
LS99298897LOCKHEED MARTIN CORP
QQ-A-200/381348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC


Techincal Specification:
BASIC SHAPE STYLET SHAPE
FABRICATION METHODEXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.062 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.062 INCHES NOMINAL
FIRST TIP RADIUS0.062 INCHES NOMINAL
FIRST TIP STYLELOWER RADIUS
HEAT TREATMENTT-3511 SOLUTION HEAT TREATED
LEFT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.063 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.156 INCHES NOMINAL
LEG THICKNESS0.156 INCHES NOMINAL
LENGTH10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL HEIGHT2.000 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE
MATERIALALUMINUM ALLOY 2024
NONDEFINITIVE SPEC/STD DATA2024 ALLOY AND T3511 TEMPER
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.063 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.156 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIPIDENTICAL
WEIGHT PER UNIT MEASURE0.670 POUNDS PER LINEAR FOOT
THIRD TIP RELATIONSHIP TO PRECEDING TIPSNOT IDENTICAL
THIRD TIP STYLEFULL RADIUS
THIRD TIP RADIUS0.062 INCHES NOMINAL
TOP FLANGE WIDTH2.126 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us