3610-00-162-6189 INKING PAD,DUPLICATING MACHINE Index 4920-00-162-6198 MAINTENANCE KIT,AIRCRAFT

National Stock Number:
9540-00-162-6193

Federal Supply Class:
9540

National Item Identification Number:
001626193

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.


Manufacturer Information:
17908201634ALUMINUM CO OF AMERICA
3839027610INTERNATIONAL LIGHT METALS CORP SUB OF MARTIN MARIETTA CORP
4196677783ALCOA/REYNOLDS METALS COMPANY
AMS-QQ-A-200/1181343SOCIETY OF AUTOMOTIVE ENGINEERS INC
AMS-QQ-A-200/11 ALL0Y 7075 TMPR81343SOCIETY OF AUTOMOTIVE ENGINEERS INC
AMS-QQ-A-200/11 ALLOY 7075 TMPR81343SOCIETY OF AUTOMOTIVE ENGINEERS INC
AMS-STD-18481343SOCIETY OF AUTOMOTIVE ENGINEERS INC
LS3025098897LOCKHEED MARTIN CORP
PA2064606012TRANSTAR METALS CORP
QQ-A-200/1181348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC


Techincal Specification:
BASIC SHAPE STYLET SHAPE
FABRICATION METHODEXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.250 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.250 INCHES NOMINAL
FIRST TIP STYLESQUARE END
HEAT TREATMENTT-6 SOLUTION HEAT TREATED
LEFT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES3.070 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.620 INCHES NOMINAL
LEG THICKNESS0.375 INCHES NOMINAL
LENGTH10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL HEIGHT7.000 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE
MATERIALALUMINUM ALLOY 7075
NONDEFINITIVE SPEC/STD DATA7075 ALLOY AND T6 TEMPER
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES3.210 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.620 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIPIDENTICAL
WEIGHT PER UNIT MEASURE7.576 POUNDS PER LINEAR FOOT
THIRD TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/FIRST TIP
TOP FLANGE WIDTH6.280 INCHES NOMINAL


Click here to Register for Free 30-day Trial