5935-00-161-3042 BACKSHELL,ELECTRICAL CONNECTOR Index 5950-00-161-3044 COIL,RADIO FREQUENCY

National Stock Number:
9540-00-161-3043

Federal Supply Class:
9540

National Item Identification Number:
001613043

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.


Manufacturer Information:
AMS-QQ-A-200/110U583SAE INTERNATIONAL
AMS-QQ-A-200/1181343SOCIETY OF AUTOMOTIVE ENGINEERS INC
AND10140-120499237AIRFORCE-NAVY AERONAUTICAL DESIGN STANDARD
LS10140-1204-598897LOCKHEED MARTIN CORP
QQ-A-200/1181348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC


Techincal Specification:
BASIC SHAPE STYLEH SHAPE
FABRICATION METHODEXTRUDED
FILLET RADIUS WHERE BOTTOM LEFT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FIRST TIP RADIUS0.094 INCHES NOMINAL
FIRST TIP STYLERIGHT QUARTER RADIUS
FOURTH TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/SECOND TIP
HEAT TREATMENTT-6511 SOLUTION HEAT TREATED
LEFT BOTTOM INSIDE ANGLE90.0 DEGREES NOMINAL
LEFT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.0625 INCHES NOMINAL
LEFT SIDE FLANGE HEIGHT2.125 INCHES NOMINAL
LEFT SIDE FLANGE THICKNESS0.094 INCHES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.0625 INCHES NOMINAL
LENGTH10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL WIDTH1.250 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE
MATERIALALUMINUM ALLOY 7075
NONDEFINITIVE SPEC/STD DATA7075 ALLOY AND T6511 TEMPER
RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.0625 INCHES NOMINAL
RIGHT SIDE FLANGE HEIGHT2.125 INCHES NOMINAL
RIGHT SIDE FLANGE THICKNESS0.094 INCHES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.0625 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
RIGHT BOTTOM INSIDE ANGLE90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIPNOT IDENTICAL
SECOND TIP RADIUS0.094 INCHES NOMINAL
SECOND TIP STYLELEFT QUARTER RADIUS
WEIGHT PER UNIT MEASURE0.606 POUNDS PER LINEAR FOOT
WEB FLANGE THICKNESS0.094 INCHES NOMINAL
THIRD TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/FIRST TIP


Click here to Register for Free 30-day Trial