|
|
|
National Stock Number:
9530-01-163-6665
Federal Supply Class:
9530
National Item Identification Number:
011636665
Description:
BAR,METAL
Detail:
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL.
|
Manufacturer Information:
| AMS-QQ-A-225/8 | 0U583 | SAE INTERNATIONAL | | AMS-QQ-A-225/8 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | AMS4117 | 0U583 | SAE INTERNATIONAL | | QQ-A-200/8 1-1/4 X 1/2 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | QQ-A-200/8 ALY6 061 TEMP-T6 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | QQ-A-200/8 ALY6061 TEMP T6 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | QQ-A-225/8 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | QQ-A-225/8 TEMP-T6 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BASIC SHAPE STYLE | FLAT | | CROSS-SECTIONAL THICKNESS | 0.5000 INCHES NOMINAL | | CROSS-SECTIONAL WIDTH | 1.250 INCHES NOMINAL | | FABRICATION METHOD | ROLLED OR COLD FINISH | | HEAT TREATMENT | T-6 SOLUTION HEAT TREATED | | LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS4117 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | NONDEFINITIVE SPEC/STD DATA | 6061 ALLOY AND T6 TEMPER | | WEIGHT PER UNIT MEASURE | 0.735 POUNDS PER LINEAR FOOT |
|
|