|
|
|
National Stock Number:
9525-01-013-3828
Federal Supply Class:
9525
National Item Identification Number:
010133828
Description:
WIRE,NONELECTRICAL
Detail:
A ferrous or nonferrous wire having a solid cross section that is square or rectangular with sharp or rounded corners or edges, or is round, half-round, hexagonal, or octagonal and whose diameter, width, or greatest distance between parallel faces is less than 3/8 inch or 10.0mm. The rectangular shape is limited to a thickness less than 3/32 inch or 2.5mm and a width of 1 1/4 inch or 30.0mm or less. For dimensions greater than above, see BAR, METAL. Excludes items having electrical resistivity or conductivity ratings.
|
Manufacturer Information:
| ASTM B166 | 81346 | AMERICAN SOCIETY FOR TESTING AND MATERIALS | | LO1002 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | P0010133828 | 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA | | PO0259NRP | 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA | | QQ-W-390 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| BASIC SHAPE STYLE | ROUND | | CROSS SECTION OUTSIDE DIAMETER | 0.062 INCHES NOMINAL | | CRITICALITY CODE JUSTIFICATION | ZZZY | | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS | | HEAT TREATMENT | ANNEALED | | LENGTH | 86.000 FEET NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B166, INCONEL 600 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY 600 | | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH | | NONDEFINITIVE SPEC/STD DATA | N06600 NUMBER AND ANNEALED CONDITION | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP | | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO1002 | | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING | | WEIGHT PER UNIT MEASURE | 1.000 POUNDS PER PIECE | | TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|