2805-01-016-9709 VALVE,POPPET,ENGINE Index 2920-01-016-9714 STARTER-GENERATOR,ENGINE,NONAIRC

National Stock Number:
9510-01-016-9710

Federal Supply Class:
9510

National Item Identification Number:
010169710

Description:
BAR,METAL

Detail:
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL.


Manufacturer Information:
AMS-QQ-S-7630U583SAE INTERNATIONAL
AMS-QQ-S-76381343SOCIETY OF AUTOMOTIVE ENGINEERS INC
ASTM A16781346AMERICAN SOCIETY FOR TESTING AND MATERIALS
MS14411C00596906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
QQ-S-76381348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC


Techincal Specification:
BASIC SHAPE STYLEROUND
CROSS SECTION OUTSIDE DIAMETER0.375 INCHES NOMINAL
FABRICATION METHODCOLD FINISH
LENGTH10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A167, TYPE 304 ASSN STD SINGLE MATERIAL RESPONSE
MATERIALSTEEL COMP 304
NONDEFINITIVE SPEC/STD DATA304 CLASS AND B CONDITION
WEIGHT PER UNIT MEASURE0.376 POUNDS PER LINEAR FOOT
SURFACE CONDITIONMACHINE OVERALL


Click here to Register for Free 30-day Trial