|
|
|
National Stock Number:
9390-00-678-1352
Federal Supply Class:
9390
National Item Identification Number:
006781352
Description:
BELLOWS,PROTECTION
Detail:
A nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
|
Manufacturer Information:
| 8754071 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 8754071 | 22852 | SPALLA INC |
|
Techincal Specification:
| CONTRACTED LENGTH | 1.125 INCHES NOMINAL | | EXTENDED LENGTH | 2.500 INCHES NOMINAL | | FSC APPLICATION DATA | CLUTCH RELEASE ROD,VEHICULAR | | LARGE END INSIDE DIAMETER | 1.210 INCHES NOMINAL | | LARGE END INSIDE LENGTH | 0.470 INCHES NOMINAL | | LARGE END OUTSIDE DIAMETER | 1.660 INCHES NOMINAL | | LARGE END OUTSIDE LENGTH | 0.470 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-3065, TYPE S, CLASS SC, GRADE 515F2GH MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | RUBBER SYNTHETIC | | NEUTRAL LENGTH | 1.840 INCHES NOMINAL | | SMALL END INSIDE DIAMETER | 0.280 INCHES MINIMUM AND 0.290 INCHES MAXIMUM | | SMALL END INSIDE LENGTH | 0.350 INCHES NOMINAL | | SMALL END OUTSIDE DIAMETER | 0.560 INCHES NOMINAL | | SMALL END OUTSIDE LENGTH | 0.350 INCHES NOMINAL | | THICKNESS AT BOTH ENDS | 0.140 INCHES MINIMUM AND 0.225 INCHES MAXIMUM | | THICKNESS BETWEEN ENDS | 0.060 INCHES NOMINAL |
|
|