|
|
|
National Stock Number:
9340-00-757-2706
Federal Supply Class:
9340
National Item Identification Number:
007572706
Description:
GLASS,LAMINATED
Detail:
A TRANSPARENT ITEM CONSISTING OF TWO OR MORE PIECES OF GLASS, WITH STRAIGHT PARALLEL SURFACES BONDED TOGETHER BY AN INTERLAY OF TRANSPARENT PLASTIC TO PREVENT FRAGMENTATION OR SPLINTERING IF BROKEN. IT MAY BE HEAT STRENGTHENED AND/OR TINTED AND IS GENERALLY USED WHERE SAFETY GLAZING CHARACTERISTICS ARE REQUIRED, SUCH AS AIRPLANE WINDOWS, EXPLOSIVE HAZARDS AND FURNITURE SHIELDING.
|
Manufacturer Information:
| C8004-03-001FN60 | 81996 | U S ARMY AVIATION AND MISSILE COMMAND | | MIL-G-3787 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | XV03-001-60 | 25169 | PROJECT MANAGER AMPHIBIOUS LIGHTERS ST LOUIS MO |
|
Techincal Specification:
| COLOR | GREEN, LIGHT | | FIRST ANGLE | 8.3 DEGREES NOMINAL | | FIRST CORNER RADIUS | 0.060 INCHES MINIMUM AND 0.120 INCHES MAXIMUM | | FOURTH CORNER RADIUS | 0.060 INCHES MINIMUM AND 0.120 INCHES MAXIMUM | | OVERALL LENGTH | 35.160 INCHES MINIMUM AND 35.220 INCHES MAXIMUM | | OVERALL THICKNESS | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM | | OVERALL WIDTH | 31.590 INCHES MINIMUM AND 31.650 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-3787,CLASS 1,TYPE 2 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL TRANSPARENCY | CLEAR | | MATERIAL | GLASS PLATE | | NONDEFINITIVE SPEC/STD DATA | 1 CLASS AND II TYPE | | PLY QUANTITY | 3 | | SECOND CORNER RADIUS | 0.060 INCHES MINIMUM AND 0.120 INCHES MAXIMUM | | SECOND ANGLE | 8.3 DEGREES NOMINAL | | STYLE DESIGNATOR | TRAPEZOID WITH ROUNDED CORNERS | | SURFACE FINISH | POLISHED | | TEST DATA DOCUMENT | 81349-MIL-G-3787 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THIRD CORNER RADIUS | 0.060 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
|
|