|
|
|
National Stock Number:
9320-00-143-7789
Federal Supply Class:
9320
National Item Identification Number:
001437789
Description:
RUBBER STRIP
Detail:
AN ELASTIC MATERIAL OF COMPACT (SOLID) OR CELLULAR STRUCTURE HAVING SMOOTH, CREPE OR POROUS SURFACE(S) AND HAVING AN OVAL, PARALLELOGRAM, SQUARE, RECTANGULAR OR D-SHAPED CROSS SECTION. IT IS PRODUCED IN VARIOUS THICKNESSES. STRIPS ARE LIMITED TO WIDTHS OF 6 INCHES (152.4MM) OR LESS. IT MAY OR MAY NOT HAVE A NONRUBBER BACKING OR A WIRE CLOTH OR CORD INSERT. FOR ITEMS HAVING A ROUND CROSS SECTION, SEE RUBBER ROUND SECTION. EXCLUDES RUBBER SHEET, INNER TUBE REPAIR. SEE ALSO NONMETALLIC ANGLE; NONMETALLIC CHANNEL; NONMETALLIC SPECIAL SHAPED SECTION.
|
Manufacturer Information:
| MILR3065 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SME655490-44 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| COLOR | BLACK BOTH SIDES | | CROSS-SECTIONAL HEIGHT | 2.180 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | CROSS-SECTIONAL WIDTH | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM | | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY THE DUROMETER HARDNESS | | ENVIRONMENTAL PROTECTION | OIL RESISTANT | | FABRICATION METHOD | SOLID | | LENGTH | 49.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-STD-417, TYPE S, CLASS SC, GRADE SC415 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-STD-417, TYPE S, CLASS SC, GRADE SC515 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | RUBBER CHLOROPRENE CLASS CR | | MINIMUM TENSILE STRENGTH | 1500 POUNDS PER SQUARE INCH | | NONMETALLIC HARDNESS RATING | 40.0 MINIMUM SHORE DUROMETER A AND 50.0 MAXIMUM SHORE DUROMETER A | | SURFACE CONDITION | SMOOTH BOTH SIDES | | TEST DATA DOCUMENT | 80063-SME655490-44 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|