6680-00-798-3057, SHAFT ASSEMBLY,FLEXIBLE

6680-00-798-3056 ADAPTER,SPEEDOMETER-TACHOMETER D

6680-00-798-3058 ADAPTER,SPEEDOMETER-TACHOMETER D

National Stock Number:
6680-00-798-3057

Federal Supply Class:
6680

National Item Identification Number:
007983057

Description:
SHAFT ASSEMBLY,FLEXIBLE

Detail:
An item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

Manufacturer Information:

6680007983057	SCY13	E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
7983057	19207	U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
M10215-1F115	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-10215	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-10215K	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-10215L	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS51071-15	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

CASING MATERIAL	RUBBER AND
	STEEL
CASING SURFACE TREATMENT	ANY ACCEPTABLE
CASING LENGTH BETWEEN FERRULES	143.937 INCHES MINIMUM AND
	144.062 INCHES MAXIMUM
CASING OUTSIDE DIAMETER	0.300 INCHES MINIMUM AND
	0.500 INCHES MAXIMUM
CASING PROTECTIVE DEVICE TYPE	PLASTIC COVER OR
	RUBBER COVER
END CONNECTION TYPE	THREADED INTERNAL BOTH ENDS
THREAD LOCATION	INTERNAL BOTH ENDS
SCREW THREAD SERIES DESIGNATOR	UNS FIRST END
	UNF SECOND END
THREAD DIRECTION	RIGHT-HAND BOTH ENDS
THREAD CLASS	2B BOTH ENDS
THREAD DEPTH	0.327 INCHES NOMINAL FIRST END
	0.375 INCHES NOMINAL SECOND END
SWIVEL END	NOT PROVIDED BOTH ENDS
WRENCHING FACILITY TYPE	HEXAGON BOTH ENDS
WIDTH ACROSS FLATS	1.000 INCHES NOMINAL FIRST END
	0.750 INCHES NOMINAL SECOND END
LUBRICATION FITTING	NOT PROVIDED BOTH ENDS
CORE MATERIAL	STEEL
CORE SURFACE TREATMENT	ZINC COATED
CORE OVERALL LENGTH	145.047 INCHES MINIMUM AND
	145.359 INCHES MAXIMUM
CORE DIAMETER	0.150 INCHES NOMINAL
CORE ROTATION DIRECTION	CLOCKWISE
END TYPE	ROUND KEYED FIRST END
	SQUARE MALE SECOND END
TIP LENGTH	1.018 INCHES MINIMUM AND
	1.022 INCHES MAXIMUM FIRST END
	0.950 INCHES MINIMUM AND
	1.010 INCHES MAXIMUM SECOND END
CROSS SECTION SIZE AND LOCATION	0.150 INCHES MINIMUM DIAMETER AND
	0.153 INCHES MAXIMUM DIAMETER FIRST END
	0.101 INCHES MINIMUM ACROSS FLATS AND
	0.104 INCHES MAXIMUM ACROSS FLATS SECOND END
SETSCREW	NOT INCLUDED FIRST END
CORE REMOVABILITY	REMOVABLE
OVERALL LENGTH	145.078 INCHES MINIMUM AND
	145.391 INCHES MAXIMUM
MINIMUM OPERATING RADIUS	5.000 INCHES
SPECIAL FEATURES	COUNTERCLOCKWISE CORE ROTATION DIRECTION.TORSION STRENGTH EITHER DIRECTION 15.0 LBS.
FSC APPLICATION DATA	SPEEDOMETER,SELF-PROPELLED GUN
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE	81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	MIL-DTL-10215
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	M10215-1F115

Click here to Register for Free 30-day Trial