|
|
|
National Stock Number:
6680-00-658-4443
Federal Supply Class:
6680
National Item Identification Number:
006584443
Description:
GENERATOR,TACHOMETER
Detail:
A GENERATOR CONSISTING OF A SERIES OF MOUNTED COILS SURROUNDING A ROTATING PERMANENT MAGNET OR A PERMANENT MAGNET AND A ROTATING ARMATURE. THE VOLTAGE OUTPUT IS DIRECTLY PROPORTIONAL TO THE SPEED OF ROTATION OF THE SHAFT. WHEN USED WITH AN ASSOCIATED INDICATOR, TRANSMITS SUCH DATA AS REVOLUTIONS PER MINUTE, SPEED OF TRAVEL, AND THE LIKE. MAY ALSO BE USED IN SERVOMECHANISM LOOPS AS A SYSTEM STABILIZER. EXCLUDES ROTARY INVERTERS, ROTARY CONVERTERS, MOTOR GENERATORS, DYNAMOTORS, GENERATOR SETS, SYNCHROS, FREQUENCY OR PHASE CHANGERS, AND ENGINE ACCESSORY GENERATORS.
|
Manufacturer Information:
| 1076-29 | 72314 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. | | 410098-1 | 96214 | RAYTHEON COMPANY | | 41990 | 24930 | L3HARRIS TECHNOLOGIES, INC | | B17998 | 49367 | AMPHENOL CORPORATION | | SA740A2 | 83555 | SERVO-TEK PRODUCTS COMPANY INC. DBA SERVO-TEK PRODUCTS | | SA740A2K | 83555 | SERVO-TEK PRODUCTS COMPANY INC. DBA SERVO-TEK PRODUCTS | | SA740AA2 | 83555 | SERVO-TEK PRODUCTS COMPANY INC. DBA SERVO-TEK PRODUCTS |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 340.0 OHMS | | ACCURACY RANGE IN PERCENT | -0.1 TO 0.1 | | CALIBRATION SPEED IN RPM | 12000.0 | | CALIBRATION VOLTAGE OUTPUT TYPE IN VOLTS | 7.0 DC | | CURRENT RATING IN AMPS | 0.001 SINGLE OUTPUT | | CURRENT TYPE | DC OUTPUT | | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION | | LENGTH OF SHAFT FROM HOUSING | 0.502 INCHES SINGLE END | | OVERALL HEIGHT | 1.187 INCHES | | OVERALL LENGTH | 2.263 INCHES | | OVERALL WIDTH | 1.187 INCHES | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE | | MOUNTING METHOD | PAD | | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.937 INCHES | | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.937 INCHES | | ROTOR SPEED RATING IN RPM | 10.0 LOW FULL LOAD AND 12000.0 HIGH FULL LOAD | | SHAFT DIAMETER | 0.1200 INCHES NOMINAL SINGLE END | | SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END | | SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE SINGLE END | | TERMINAL TYPE AND QUANTITY | 2 SCREW |
|
|