|
|
|
National Stock Number:
6640-01-267-5583
Federal Supply Class:
6640
National Item Identification Number:
012675583
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 87-9-18-225 | 66735 | AIR FORCE MEDICAL LOGISTICS OFFICE | | CDPR 012 F4 | 08071 | EMD MILLIPORE CORP |
|
Techincal Specification:
| BODY DIAMETER | 75.0 MILLIMETERS NOMINAL | | BODY OVERALL LENGTH | 305.0 MILLIMETERS NOMINAL | | DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 15.0 POUNDS PER SQUARE INCH | | FILTERING MEDIA DESIGN | SPIRAL WOUND SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 5.0 NOMINAL | | MEDIA FOR WHICH DESIGNED | WATER | | SPECIAL FEATURES | POLYPROPYLENE WOUND FIBERS,GLASS FILLED POLYPROPYLENE END CAPS BONDED WITH POLYOLEFIN BASED HOT MELT ADHESIVE,POLYPROPYLENE INNER CORE; FILTERS HAVE A VERY HIGH SOLIDS RETENTION CAPACITY AND PROVIDE PREFILTRATION FOR REVERSE OSMOSIS: CAN BE USED ON MUNICIPAL WATERS AND OTHER COMPATIBLE FLUIDS WHERE FINER FILTRATION IS NOT NEEDED | | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | TEMP RATING | 20.0 CELSIUS MINIMUM AND 40.0 CELSIUS MAXIMUM |
|
|