ACCURACY IN PERCENT | -1.0 TO 1.0 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE |
BACKGROUND COLOR | WHITE SINGLE INDICATOR SINGLE RANGE |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 6.050 INCHES NOMINAL |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.725 INCHES NOMINAL |
CIRCUIT ATTACHMENT METHOD AND QUANTITY | 2 THREADED STUD |
CIRCUIT CONSTRUCTION TYPE | NONELECTRONIC |
CIRCUIT CURRENT FOR WHICH DESIGNED | DC |
DIAL SCALE MARKING COLOR | BLACK SINGLE INDICATOR SINGLE RANGE |
DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 1500.0 |
FURNISHED ITEMS AND QUANTITY | NUTS 6,LOOSE WASHERS 4,MACHINE SCREWS 4,SPLIT-RING LOCKWASHERS 4 |
FEATURES PROVIDED | ZERO ADJUSTER AND SELF-ILLUMINATION FACILITY |
INDICATOR TYPE | DIAL W/POINTER |
INSTALLATION DESIGN | PANEL |
NUCLEAR HARDNESS CRITICAL FEATURE | NONHARDENED |
OVERALL HEIGHT | 6.690 INCHES NOMINAL |
OVERALL LENGTH | 7.496 INCHES NOMINAL |
OVERALL WIDTH | 1.520 INCHES NOMINAL |
PANEL FOR WHICH DESIGNED | NONMAGNETIC |
MEASUREMENT RANGE | +0.0 TO 200.0 MICROAMPERES, DC SINGLE INDICATOR SINGLE RANGE |
METER DEPTH BEHIND MOUNTING FLANGE | 5.760 INCHES NOMINAL |
METER BODY HEIGHT BEHIND MOUNTING FLANGE | 5.435 INCHES NOMINAL |
METER BODY WIDTH BEHIND MOUNTING FLANGE | 1.225 INCHES NOMINAL |
MOUNTING ARRANGEMENT STYLE | FOUR HOLE/STUD RECTANGULAR/SQUARE |
MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
MOUNTING HOLE DIAMETER | 0.138 INCHES NOMINAL |
MOVEMENT SUSPENSION METHOD | JEWEL PIVOT BASE |
MOVEMENT TYPE | MOVING COIL, PERMANENT MAGNET |
POINTER COLOR | BLACK SINGLE INDICATOR SINGLE RANGE |
SCALE DIVISION QUANTITY | 40 SINGLE INDICATOR SINGLE RANGE |
SCALE GRADUATION TYPE | LINEAR SINGLE INDICATOR SINGLE RANGE |
SCALE SELECTION METHOD | TERMINAL |
SPECIAL FEATURES | INDICATOR POINTER IS RED IN COLOR |
SPECIAL MARKINGS | POSITIVE SHALL BE MARKED ON REAR UPPER TERMINAL OF AMMETER; THERE SHALL BE A IDENTIFICATION PLATE WITH A MARKED QUANITY MEASURED BY THE AMMETER |
STYLE DESIGNATOR | RECTANGULAR FLUSH MTG |
SURFACE TREATMENT | ENAMEL LUSTERLESS |
TEST DATA DOCUMENT | 81349-MIL-S-901 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 96906-MIL-STD-108 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). AND 96906-MIL-STD-167 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). AND 23905-70000+06901-81 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |