| DUTY CYCLE | CONTINUOUS |
| ANGLE OF SHAFT TO MOUNTING BASE | 9090.0 DEGREES FIRST END |
| BEARING TYPE | SLEEVE |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | AMBIENT AIR |
| CUBIC MEASURE | 0.016 CUBIC FEET |
| CURRENT TYPE | AC INPUT |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | ANGLED TO ARMATURE/ROTOR AXIS SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 1125.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION |
| FLAT DEPTH | 0.0310 INCHES NOMINAL SINGLE END |
| FLATTED PORTION LENGTH | 0.6250 INCHES NOMINAL SINGLE END |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| FSC APPLICATION DATA | PROCESSOR,X-RAY FILM |
| INCLOSURE FEATURE | OPEN |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 2.375 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 2.500 INCHES |
| OVERALL HEIGHT | 2.875 INCHES |
| OVERALL LENGTH | 3.125 INCHES |
| OVERALL WIDTH | 3.000 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.750 INCHES SINGLE END |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| MOUNTING METHOD | PAD |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 0.750 INCHES FIRST END |
| SHAFT DIAMETER | 0.3120 INCHES NOMINAL SINGLE END |
| SHAFT END CHARACTERISTIC | A5 SINGLE STYLE SINGLE END |
| SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | GEARCASE MOTOR 60H 115V PROCESSOR XRAY FILM |
| PHASE | SINGLE INPUT |
| REFERENCE DATA AND LITERATURE | MANUFACTURES MANUALS ON THE PERI-PRO X-RAY FILM PROCESSOR |
| SPECIAL FEATURES | THREE LEADS 12 IN. LG,TERMINATED BY 3 FEMALE 1/4 IN. LG QUICK DISCONNECT TERM |
| WINDING TYPE | SYNCHRONOUS SHADED POLE |
| SPECIFIC USE | DRIVES THE TRANSPORT ASSY |
| TERMINAL TYPE AND QUANTITY | 3 CONNECTOR, PLUG |